“Teledyne FLIR Boson Lens Focus Tool” has been added to your cart.
View cart
Showing 41–60 of 91 results
-
$499.00
Control the FLIR BOSON remotely with the “RC-HD-IF” Remote Control Interface.
- 6 to 26 Volts DC Input
- HD and Composite Outputs
- Reverse Polarity Protection
- Control w/RC Receiver
- USB Video Support
- S-Bus & PWM
- Compatible with most digital HDMI transmitters
- Setup and Calibration Software Included
- Weight: 12 grams
-
$399.00
Ideal for sUAS and UAV Operations
- 6 to 26 Volts DC Input
- Reverse Polarity Protection
- Control w/RC Receiver
- S-Bus & PWM
- USB Video Support
- Color Palette Selection
- (FFC) Flat Field Correction Shutter Control
- (DDE) Digital Detail Enhancement
- Thermal AGC
- Continuous Digital Zoom
- 2 Composite Video Outputs
- USB Video Output
- 5.8 grams
-
$149.00
- VPC – Video, Power & Communication
- USB or TTL Communication
- Power via USB or 5 to 26Volts DC Input
- Reverse Polarity Protected
- USB Video Support
- Stream Video to PC via USB
- 2 Composite Video Outputs
- Available with Sync Input/Output
- Low Profile
- Alternate connection ports
-
$299.95
-
LVDS Digital Video Input
Accepts high-speed LVDS video from compatible encoder boards or imaging modules, enabling direct digital video ingestion without analog conversion.
-
H.264 & MJPEG Compression
Offers H.264 Baseline and Main profiles for efficient bandwidth usage, as well as MJPEG for applications requiring frame-by-frame access or minimal compression artifacts.
-
Flexible Power Options
Operates from 12VDC input and supports PoE, simplifying installation in distributed or remote systems.
-
Multi-Stream IP Encoding
Supports up to three simultaneous video streams, allowing different resolutions, frame rates, or compression formats for viewing, recording, and analytics.
-
ONVIF & Network Compatibility
Designed for use with LAN-based and ONVIF-compliant applications, enabling plug-and-play integration with existing IP video infrastructure.
-
Alarm & Event Handling
Integrated motion detection, alarm input/output, and network-triggered events support intelligent monitoring and automated responses.
-
$279.95
Product Highlights 3G/HD/SD-SDI to HDMI Video Converter with Scaling Simultaneous 1 x HDMI and 2 x SDI output Simultaneous 1 x HD and 2 x SDI Output Video Converter During the integration of your camera you may need a few things along the way. We currently have the RHP-3GSDI-HDMI-S which is a 3G/HD/SD-SDI to…
-
- Thermal & Visible Camera Enclosed In One Package
- Dual Camera Control via Serial Connection, Push Button, Receiver PWM or Wireless Joystick
- 6 to 26 Volt DC Input
- Multi Window Mode – PiP, Split View, Single and Quad view
- 1920 x 1080 HD Visible camera included
- Onboard IMU for easy integration with a gimbal
IR Cut Filter Notice:
The RHP-BOS-DS-IF Dual camera interface includes a visible camera and lens and offered with or without an infrared cut filter.
An infrared cut filter (IR-cut filter) is used to block light with wavelengths longer than visible light while transmitting visible light. IR cut filters can operate by either reflecting or absorbing the light to be blocked. IR cut filters are often used in solid state (CCD or CMOS) video cameras to block infrared light, which otherwise causes a lowering of the contrast due to the high sensitivity of many camera sensors to near-infrared light. IR cut filters for this purpose are mostly operating by reflecting the IR portion of the light.
This product has multiple variants. The options may be chosen on the product page
-
$199.95
- VPC Kit with reversible USB-C connector
- Supports both USB2 and USB3 speeds
- Sync IO to synchronize images with other devices
- Allows users to stream multiple 16bit video streams at full 60Hz.
- Fits with Boson Tripod mount for thermal heatsinking
- Matches FLIR USB-C USB 2.0 VPC kit profile for backwards compatibility to existing systems
-
$142.99
Table stand kit for the FLIR Ax5 series. The kit consists of a base support and a gooseneck.
-
$769.00
- Multiple input voltage options
- 24 or 28 VAC output for longer wire runs
- Meets NEMA Type 4X/IP66 standards for weatherproof enclosure
- AC power indicator with power on/off switch
- Compatible with fixed-mount, dome, and pan/tilt cameras
-
$2,122.00
FLIR 12V 4″ Blackbody Source for ALC & Supplemental FFC, offers a uniform temperature source for FLIR Tau 2 Thermal Cameras. Low cost 4-inch blackbody which provides a uniform temperature source when using FLIR’s Alt Lens Cal software to field-calibrate lens-less Photon or Tau cameras with third-party lenses, or to take advantage of the Supplemental…
-
$7,204.00
- IR lens, f=70 mm (6?) with case
-
$42.00
Single USB interface cable for the Boson VPC with USB-C to USB-A Cable and BNC.
-
$66.00
Custom tool to change lens focus.
-
-
$193.00
Single USB interface to Boson with USB-C to USB-A Cable
-
$217.00
Boson USB / Analog Video Power Connector (VPC) Kit
-
$557.00 – $2,132.00Price range: $557.00 through $2,132.00
- Power (DIN), 2x video (composite),
- RS 232 (DB 9, female),
- RS485 (RJ11),
- Ethernet (RJ45),
- Payload pass through conductors.
- Available in 10′, 50′, and 100′ lengths
This cable is compatible with the following PTU’s:
-
This M12 to RJ45, X-coded Ethernet cable is an accessory for the following products:
- FLIR A400/A700 Thermal Smart Sensor configuration
- FLIR A400/A700 Thermal Image Streaming configuration
- FLIR GF77a
-
$164.00
For use with:
- TRITONF-SERIES ID
- ELARAFC-SERIES O
- ELARAFC-Series R
- ELARAFC-SERIES ID
-
$189.00
- For pole diameters between 65mm-110mm
