coming soon

“6Pin JST Cable to USB and RCA Composite” has been added to your cart. View cart

Showing 1–20 of 90 results

6Pin JST Cable to USB and flying leads Composite video
$10.00
- 3′ Cable
- 6 Pin JST Cable to USB and flying leads Composite video
- Used with the Low Profile BOSON VPC3 interface.
Add to Cart
6Pin JST Cable to USB and RCA Composite
$10.00
- 3′ Cable
- 6 Pin JST to USB and RCA Composite Video
- Used with the Low Profile BOSON VPC interface and the TTL interface.
Add to Cart
7Pin JST Cable to USB 3
- 3′ Length
- Female 7 Pin JST to USB 3
- Used with the RHP-BOS-VPC3-IF – Low Profile BOSON VPC3 Interface Module with USB3
Read more

Environmental Enclosure for the Teledyne FLIR Boson

Material: Anodized Aluminum
Size (L x W x H): 82mm x 47mm x 52mm**
2 x 1/4″-20 Mount Points
Encapsulation: IP67 Rated
Weight: < 11 oz. (< 300g)

Compatible With:

Boson/Boson+ 320^*	Boson/Boson+ 640^*

2.3mm \| 92° HFoV 4.3mm \| 50° HFoV 4.5mm \| 50° HFoV SL Rad. 6.3mm \| 34° HFoV 6.3mm \| 34° HFoV Rad. 9.1mm \| 24° HFoV 13.8mm \| 16° HFoV 18mm \| 12° HFoV	4.9mm \| 95° HFoV 4.9mm \| 95° HFoV SL 8.7mm \| 50° HFoV 9.2mm \| 50° HFoV SL Rad. 13.6mm \| 32° HFoV SL 13.6mm \| 32° HFoV SL Rad. 13.6mm \| 32° HFoV NS 14mm \| 32° HFoV 18mm \| 24° HFoV 18mm\|24° HFoV SL 18mm\|24° HFoV Rad. 24mm \| 18° HFoV 24mm \| 18° HFoV Rad.
_{SL=Short Lens \| Rad.=Radiometric \| NS=No Shutter}
^*Teledyne FLIR Boson Thermal Imaging Cameras sold separately.
_{**Measurement does not include connector. Future 95° version width may increase to 48mm.}

Low Profile BOSON VPC Interface Module with optional EXT. Sync in/out
$129.95
- VPC – Video, Power & Communication
- 5 to 26Volts DC Input
- Reverse Polarity Protected
- Power via USB
- USB Video Support
- Stream Video to PC via USB
- 2 Composite Video Outputs
- Ext. Video SYNC In/Out Option
- Low Profile
- Works with Boson/Boson+ 320 or 640 Versions
Select options This product has multiple variants. The options may be chosen on the product page
Low Profile BOSON VPC3 Interface Module with USB3
$159.99
- Improved heat dissipation
- VPC – Video, Power & Communication
- 5 to 26Volts DC Input
- Reverse Polarity Protected
- Power via USB3
- USB3 Video Support
- Stream Video to PC via USB3
- Ext. Video SYNC In/Out Option
- Low Profile
- Works with Boson/Boson+ 320 or 640 Versions
Select options This product has multiple variants. The options may be chosen on the product page
Low Profile Lepton USB VPC Interface Module
$95.00
- VPC – Video, USB Power & Communication
- Power via 5Volt USB
- USB Video Support
- Stream Video to PC via USB
- Low Profile
- Works with FLIR Lepton 3.5 radiometric
Add to Cart
RHP Boson Camera Link Interface Board
$399.00
- Camera Link SDR-26 Base Mode Video Output
- Wide input voltage range of 5-26VDC
  - Multiple power inputs
- Reverse Polarity Protection
- Master / Slave Sync Option (30Hz Only)
  - 3.3V TTL/UART Control
- USB Video and Control
- USB Video Support
- Allows for use with Boson Tripod Mount Adapter
Select options This product has multiple variants. The options may be chosen on the product page
RHP Boson LVDS Encoder Board
$599.90
- 5-26VDC Input 6V-26VDC recommended
- Power over LVDS interface is possible.
- Upscale video to 1080p and output over LVDS for backwards compatibility with existing systems.
- Compatible with LVDS IP Encoder for ONVIF compliant output
- USB Setup and Configuration
- 3 Configurable profiles for power up defaults
- Compatible with RHP IP LVDS Encoder Board
Select options This product has multiple variants. The options may be chosen on the product page
RHP Boson RC-HD-IF Remote Control Interface
$499.00
Control the FLIR BOSON remotely with the “RC-HD-IF” Remote Control Interface.
- 6 to 26 Volts DC Input
- HD and Composite Outputs
- Reverse Polarity Protection
- Control w/RC Receiver
- USB Video Support
- S-Bus & PWM
- Compatible with most digital HDMI transmitters
- Setup and Calibration Software Included
- Weight: 12 grams
Select options This product has multiple variants. The options may be chosen on the product page
RHP Boson RC-IF Remote Control Interface
$399.00
Ideal for sUAS and UAV Operations
- 6 to 26 Volts DC Input
- Reverse Polarity Protection
- Control w/RC Receiver
- S-Bus & PWM
- USB Video Support
- Color Palette Selection
- (FFC) Flat Field Correction Shutter Control
- (DDE) Digital Detail Enhancement
- Thermal AGC
- Continuous Digital Zoom
- 2 Composite Video Outputs
- USB Video Output
- 5.8 grams
Select options This product has multiple variants. The options may be chosen on the product page
RHP BOSON VPC TTL Interface Module
$149.00
- VPC – Video, Power & Communication
- USB or TTL Communication
- Power via USB or 5 to 26Volts DC Input
- Reverse Polarity Protected
- USB Video Support
  - Stream Video to PC via USB
- 2 Composite Video Outputs
  - Available with Sync Input/Output
- Low Profile
- Alternate connection ports
Select options This product has multiple variants. The options may be chosen on the product page
RHP-BOS-DS-IF Dual Thermal Sensor Interface
- Thermal & Visible Camera Enclosed In One Package
- Dual Camera Control via Serial Connection, Push Button, Receiver PWM or Wireless Joystick
- 6 to 26 Volt DC Input
- Multi Window Mode – PiP, Split View, Single and Quad view
- 1920 x 1080 HD Visible camera included
- Onboard IMU for easy integration with a gimbal
IR Cut Filter Notice:
The RHP-BOS-DS-IF Dual camera interface includes a visible camera and lens and offered with or without an infrared cut filter.
An infrared cut filter (IR-cut filter) is used to block light with wavelengths longer than visible light while transmitting visible light. IR cut filters can operate by either reflecting or absorbing the light to be blocked. IR cut filters are often used in solid state (CCD or CMOS) video cameras to block infrared light, which otherwise causes a lowering of the contrast due to the high sensitivity of many camera sensors to near-infrared light. IR cut filters for this purpose are mostly operating by reflecting the IR portion of the light.
This product has multiple variants. The options may be chosen on the product page
RHP-BOS-USBC-IF
$199.95
- VPC Kit with reversible USB-C connector
- Supports both USB2 and USB3 speeds
- Sync IO to synchronize images with other devices
- Allows users to stream multiple 16bit video streams at full 60Hz.
- Fits with Boson Tripod mount for thermal heatsinking
- Matches FLIR USB-C USB 2.0 VPC kit profile for backwards compatibility to existing systems
Select options This product has multiple variants. The options may be chosen on the product page
Teledyne FLIR BOSON Boson VPC Cable
$42.00
Single USB interface cable for the Boson VPC with USB-C to USB-A Cable and BNC.

Add to Cart
Teledyne FLIR Boson Lens Focus Tool
$66.00
Custom tool to change lens focus.

Add to Cart
Teledyne FLIR Tau 2 640 x 512 Lensless – LWIR Thermal Imaging Camera Core
$6,813.00
This product has been discontinued and stock is limited.
- 640 x 512 Pixels
- Lensless Version
- Frame Rate: Fast 30Hz or Slow <9Hz Available
- 17μm Pixel Pitch
- 72 Grams
- LWIR
Performance Grade <50mK NEDT SKU:46640001X-FPNLX – $6813.00
Industrial Grade <30mK NEDT SKU:46640001X-FINLX – $8096.00

Interfaces and Accessories sold separately.
Select options This product has multiple variants. The options may be chosen on the product page
RHP-BOS-DSU2-IF Dual Sensor USB 2 Board for Boson and E/O
- Dual USB Video over single interface
- Optically Centered
- 2x additional USB ports for other sensors or cameras
- Small form factor
- Wide input range 5-17 VDC
- Ideal for Drone, UAV, UGV Implementation
- No drivers Required
- Compatible with Windows, Mac and Linux Operating systems
Add to Cart
Teledyne FLIR Hadron 640R High Performance, Dual Thermal and Visible OEM Camera Module
Price range: $3,992.00 through $4,330.00
- IP54 rated
- 50mm x 36mm x 43mm (depth)
- 56 grams
- 2.9W max power, 1.8W typical power
IR Thermal Camera:

Radiometric 640 x 512 Boson

13.6mm

32° HFOV

MIPI (2-lanes)

MIPI, I²C
EO Visible Camera:

64 MP Sensor

67° HFOV

MIPI (4-lanes),

MIPI, I2C input

Configurable to low-light applications
Hadron 640R     <40mK NEDT SKU:70640AS32–6PMRXX – $3992.00
Hadron+ 640R   <20mK NEDT SKU:70640AS32–6PARXP – $4330.00
Hadron+ 640   <20mK NEDT SKU:70640AS32–6PAAXP – $4227.00

Hadron Development Kits are now available.
Select options This product has multiple variants. The options may be chosen on the product page
Teledyne FLIR Hadron 640R Development Kits
Price range: $1,031.00 through $2,062.00
Maximize efficiency with the Hadron 640R^* Development Kits. The new development kits enable integrators to start imaging with the SWaP-optimized Hadron 640R radiometric thermal and visible cameras within just hours using the NVIDIA Jetson Nano, the Qualcomm RB5, and the Qualcomm 865.
- Qualcomm 865
- Nvidia Nano
- Qualcomm rb5
Communication with the EO camera is achieved via MIPI or I2C. For the Boson camera MIPI, I2C, or USB protocols can be used.

421-0094-00 H640R Qualcomm 865 Test Kit – $1,031.00

421-0095-00 H640R Nvidia Nano Test Kit – $1,031.00

421-0096-00 H640R Qualcomm RB5 Test Kit – $2,062.00

_{*Teledyne FLIR Hadron 640 sold separately.}
Select options This product has multiple variants. The options may be chosen on the product page