“10Pin JST SUR to Dupont Connectors” has been added to your cart.
View cart
Showing 1–20 of 140 results
-

$10.00
- 1 foot length
- 10 Pin JST SUR connector to 6 Dupont connectors
- Configured for use with the RHP-BOS-RC-IF
-

$10.00
- 1 foot length
- 10 Pin JST connector to SUR 32AWG Connectors
- Configured for use with the RHP-BOS-RC-HD-IF
-

$10.00
- 3′ Cable
- 4 Pin JST connector to USB
- Used with: RHP-BOS-RC-IF, RHP-BOS-RC-HD-IF, RHP-BOS-LVDS, RHP-BOS-CL-SY-IF, RHP-BOS-DS-IF
-

$10.00
- 3′ Cable
- 6 Pin JST Cable to USB and flying leads Composite video
- Used with the Low Profile BOSON VPC3 interface.
-

$10.00
- 3′ Cable
- 6 Pin JST to USB and RCA Composite Video
- Used with the Low Profile BOSON VPC interface and the TTL interface.
-

$10.00
- 1 foot length
- 6 Pin JST connector to bare wires
- Configured for use with the RHP-BOS-RC-IF
-

$10.00
- 1 foot length
- 6 Pin JST connector to 2 bare wires
- Configured for use with the RHP-BOS-RC-IF, RHP-BOS-RC-HD-IF, RHP-BOS-LVDS-IF
-

$10.00
- 1 foot length
- 6 Pin JST connector to bare wires
- Configured for use with the RHP-BOS-VPC-IF, RHP-BOS-VPC3-IF, RHP-BOS-TTL-IF
-

- 3′ Length
- Female 7 Pin JST to USB 3
- Used with the RHP-BOS-VPC3-IF – Low Profile BOSON VPC3 Interface Module with USB3
-

$10.00
- 7 Pin JST connector to bare wires
- Configured for use with the RHP-BOS-TTL-IF and RHP-BOS-CL-SY-IF
- 1 foot length
-

- Material: Anodized Aluminum
- Size (L x W x H): 82mm x 47mm x 52mm**
- 2 x 1/4″-20 Mount Points
- Encapsulation: IP67 Rated
- Weight: < 11 oz. (< 300g)
Compatible With:
| Boson/Boson+ 320* |
Boson/Boson+ 640* |
|
2.3mm | 92° HFoV
4.3mm | 50° HFoV
4.5mm | 50° HFoV SL Rad.
6.3mm | 34° HFoV
6.3mm | 34° HFoV Rad.
9.1mm | 24° HFoV
13.8mm | 16° HFoV
18mm | 12° HFoV |
4.9mm | 95° HFoV
4.9mm | 95° HFoV SL
8.7mm | 50° HFoV
9.2mm | 50° HFoV SL Rad.
13.6mm | 32° HFoV SL
13.6mm | 32° HFoV SL Rad.
13.6mm | 32° HFoV NS
14mm | 32° HFoV
18mm | 24° HFoV
18mm|24° HFoV SL
18mm|24° HFoV Rad.
24mm | 18° HFoV
24mm | 18° HFoV Rad. |
| SL=Short Lens | Rad.=Radiometric | NS=No Shutter |
| *Teledyne FLIR Boson Thermal Imaging Cameras sold separately. |
| **Measurement does not include connector. Future 95° version width may increase to 48mm. |
This product has multiple variants. The options may be chosen on the product page
-

$129.95
- VPC – Video, Power & Communication
- 5 to 26Volts DC Input
- Reverse Polarity Protected
- Power via USB
- USB Video Support
- Stream Video to PC via USB
- 2 Composite Video Outputs
- Ext. Video SYNC In/Out Option
- Low Profile
- Works with Boson/Boson+ 320 or 640 Versions
-

$159.99
- Improved heat dissipation
- VPC – Video, Power & Communication
- 5 to 26Volts DC Input
- Reverse Polarity Protected
- Power via USB3
- USB3 Video Support
- Stream Video to PC via USB3
- Ext. Video SYNC In/Out Option
- Low Profile
- Works with Boson/Boson+ 320 or 640 Versions
-

$95.00
- VPC – Video, USB Power & Communication
- Power via 5Volt USB
- USB Video Support
- Stream Video to PC via USB
- Low Profile
- Works with FLIR Lepton 3.5 radiometric
-

$399.00
- Camera Link SDR-26 Base Mode Video Output
- Wide input voltage range of 5-26VDC
- Reverse Polarity Protection
- Master / Slave Sync Option (30Hz Only)
- USB Video and Control
- USB Video Support
- Allows for use with Boson Tripod Mount Adapter
-

$599.90
- 5-26VDC Input 6V-26VDC recommended
- Power over LVDS interface is possible.
- Upscale video to 1080p and output over LVDS for backwards compatibility with existing systems.
- Compatible with LVDS IP Encoder for ONVIF compliant output
- USB Setup and Configuration
- 3 Configurable profiles for power up defaults
- Compatible with RHP IP LVDS Encoder Board
-

$299.00
-
MIPI CSI-2 compatible interface for FLIR Boson+
-
External 5–17 VDC input or 3.3V CSI power (selectable)
-
3.3V or 1.8V Sync, configurable as Master or Slave
-
USB UVC video + communication support
-
I²C communication over MIPI
-
Compatible with NVIDIA Jetson and Raspberry Pi camera pinouts
-
Supports single-lane or dual-lane MIPI configurations
-
Ultra-low latency thermal video output
MIPI Output Only Available with FLIR Boson+
-

$499.00
Control the FLIR BOSON remotely with the “RC-HD-IF” Remote Control Interface.
- 6 to 26 Volts DC Input
- HD and Composite Outputs
- Reverse Polarity Protection
- Control w/RC Receiver
- USB Video Support
- S-Bus & PWM
- Compatible with most digital HDMI transmitters
- Setup and Calibration Software Included
- Weight: 12 grams
-

$399.00
Ideal for sUAS and UAV Operations
- 6 to 26 Volts DC Input
- Reverse Polarity Protection
- Control w/RC Receiver
- S-Bus & PWM
- USB Video Support
- Color Palette Selection
- (FFC) Flat Field Correction Shutter Control
- (DDE) Digital Detail Enhancement
- Thermal AGC
- Continuous Digital Zoom
- 2 Composite Video Outputs
- USB Video Output
- 5.8 grams
-

$149.00
- VPC – Video, Power & Communication
- USB or TTL Communication
- Power via USB or 5 to 26Volts DC Input
- Reverse Polarity Protected
- USB Video Support
- Stream Video to PC via USB
- 2 Composite Video Outputs
- Available with Sync Input/Output
- Low Profile
- Alternate connection ports