“RHP Boson MIPI Interface” has been added to your cart.
View cart -
$129.95
- VPC – Video, Power & Communication
- 5 to 26Volts DC Input
- Reverse Polarity Protected
- Power via USB
- USB Video Support
- Stream Video to PC via USB
- 2 Composite Video Outputs
- Ext. Video SYNC In/Out Option
- Low Profile
- Works with Boson/Boson+ 320 or 640 Versions
-
$159.99
- Improved heat dissipation
- VPC – Video, Power & Communication
- 5 to 26Volts DC Input
- Reverse Polarity Protected
- Power via USB3
- USB3 Video Support
- Stream Video to PC via USB3
- Ext. Video SYNC In/Out Option
- Low Profile
- Works with Boson/Boson+ 320 or 640 Versions
-
$399.00
- Camera Link SDR-26 Base Mode Video Output
- Wide input voltage range of 5-26VDC
- Reverse Polarity Protection
- Master / Slave Sync Option (30Hz Only)
- USB Video and Control
- USB Video Support
- Allows for use with Boson Tripod Mount Adapter
-
$299.00
-
MIPI CSI-2 compatible interface for FLIR Boson+
-
External 5–17 VDC input or 3.3V CSI power (selectable)
-
3.3V or 1.8V Sync, configurable as Master or Slave
-
USB UVC video + communication support
-
I²C communication over MIPI
-
Compatible with NVIDIA Jetson and Raspberry Pi camera pinouts
-
Supports single-lane or dual-lane MIPI configurations
-
Ultra-low latency thermal video output
MIPI Output Only Available with FLIR Boson+
-
$399.00
Ideal for sUAS and UAV Operations
- 6 to 26 Volts DC Input
- Reverse Polarity Protection
- Control w/RC Receiver
- S-Bus & PWM
- USB Video Support
- Color Palette Selection
- (FFC) Flat Field Correction Shutter Control
- (DDE) Digital Detail Enhancement
- Thermal AGC
- Continuous Digital Zoom
- 2 Composite Video Outputs
- USB Video Output
- 5.8 grams
-
$149.00
- VPC – Video, Power & Communication
- USB or TTL Communication
- Power via USB or 5 to 26Volts DC Input
- Reverse Polarity Protected
- USB Video Support
- Stream Video to PC via USB
- 2 Composite Video Outputs
- Available with Sync Input/Output
- Low Profile
- Alternate connection ports
-
$299.95
-
LVDS Digital Video Input
Accepts high-speed LVDS video from compatible encoder boards or imaging modules, enabling direct digital video ingestion without analog conversion.
-
H.264 & MJPEG Compression
Offers H.264 Baseline and Main profiles for efficient bandwidth usage, as well as MJPEG for applications requiring frame-by-frame access or minimal compression artifacts.
-
Flexible Power Options
Operates from 12VDC input and supports PoE, simplifying installation in distributed or remote systems.
-
Multi-Stream IP Encoding
Supports up to three simultaneous video streams, allowing different resolutions, frame rates, or compression formats for viewing, recording, and analytics.
-
ONVIF & Network Compatibility
Designed for use with LAN-based and ONVIF-compliant applications, enabling plug-and-play integration with existing IP video infrastructure.
-
Alarm & Event Handling
Integrated motion detection, alarm input/output, and network-triggered events support intelligent monitoring and automated responses.
-
$217.00 – $256.00Price range: $217.00 through $256.00
- Low Light IMX415 Sony STARVIS Sensor
- Lossless Sensor Zoom with Pan, Tilt and Roll
- USB2.0 UVC Compliant MJPG/YUY2 Output
- Integrated Dual Channel Microphone
- Low Profile Connector for Compact Installation
- SWaP – 21x21mm – 3g (Camera Only) – <1.25W
- Sync Output 30/60Hz (3.3V Logic)
*Lens, Mount and Accessories Sold Separately.
-
- Thermal & Visible Camera Enclosed In One Package
- Dual Camera Control via Serial Connection, Push Button, Receiver PWM or Wireless Joystick
- 6 to 26 Volt DC Input
- Multi Window Mode – PiP, Split View, Single and Quad view
- 1920 x 1080 HD Visible camera included
- Onboard IMU for easy integration with a gimbal
IR Cut Filter Notice:
The RHP-BOS-DS-IF Dual camera interface includes a visible camera and lens and offered with or without an infrared cut filter.
An infrared cut filter (IR-cut filter) is used to block light with wavelengths longer than visible light while transmitting visible light. IR cut filters can operate by either reflecting or absorbing the light to be blocked. IR cut filters are often used in solid state (CCD or CMOS) video cameras to block infrared light, which otherwise causes a lowering of the contrast due to the high sensitivity of many camera sensors to near-infrared light. IR cut filters for this purpose are mostly operating by reflecting the IR portion of the light.
This product has multiple variants. The options may be chosen on the product page
-
$199.95
- VPC Kit with reversible USB-C connector
- Supports both USB2 and USB3 speeds
- Sync IO to synchronize images with other devices
- Allows users to stream multiple 16bit video streams at full 60Hz.
- Fits with Boson Tripod mount for thermal heatsinking
- Matches FLIR USB-C USB 2.0 VPC kit profile for backwards compatibility to existing systems
-
- Dual USB Video over single interface
- Optically Centered
- 2x additional USB ports for other sensors or cameras
- Small form factor
- Wide input range 5-17 VDC
- Ideal for Drone, UAV, UGV Implementation
- No drivers Required
- Compatible with Windows, Mac and Linux Operating systems
-
Works with these RHP Boson Interface Assemblies:
Instantly Download Below
-
Works with these RHP Boson Interface Assemblies
Instantly Download Below
Teledyne FLIR Triton FH-669 R, 640 x 512, 9MM 69° FOV - LWIR Multispectral Fixed Camera
1 × $10,799.00 
Teledyne FLIR Tau WFOV Lens Locking Ring
1 × $24.00 
Teledyne FLIR Tau NFOV Lens Holder
1 × $58.00 
Teledyne FLIR FB-650 ID 640 x 480 8.7MM 50° HFOV - LWIR Thermal Analytics Security Camera
1 × $4,249.00 
Teledyne FLIR Boson Development Board
1 × $1,022.00