10Pin JST SUR to Dupont Connectors
$10.00- 1 foot length
- 10 Pin JST SUR connector to 6 Dupont connectors
- Configured for use with the RHP-BOS-RC-IF
Showing 1–20 of 91 results
-
-
10Pin JST to SUR 32AWG Connectors
$10.00- 1 foot length
- 10 Pin JST connector to SUR 32AWG Connectors
- Configured for use with the RHP-BOS-RC-HD-IF
-
4Pin JST to USB Cable
$10.00- 3′ Cable
- 4 Pin JST connector to USB
- Used with: RHP-BOS-RC-IF, RHP-BOS-RC-HD-IF, RHP-BOS-LVDS, RHP-BOS-CL-SY-IF, RHP-BOS-DS-IF
-
6Pin JST Cable to USB and flying leads Composite video
$10.00- 3′ Cable
- 6 Pin JST Cable to USB and flying leads Composite video
- Used with the Low Profile BOSON VPC3 interface.
-
6Pin JST Cable to USB and RCA Composite
$10.00- 3′ Cable
- 6 Pin JST to USB and RCA Composite Video
- Used with the Low Profile BOSON VPC interface and the TTL interface.
-
6Pin JST to Flying Leads
$10.00- 1 foot length
- 6 Pin JST connector to bare wires
- Configured for use with the RHP-BOS-RC-IF
-
6Pin JST to Flying Leads (2 pins populated)
$10.00- 1 foot length
- 6 Pin JST connector to 2 bare wires
- Configured for use with the RHP-BOS-RC-IF, RHP-BOS-RC-HD-IF, RHP-BOS-LVDS-IF
-
6Pin JST to Flying Leads (4 pins populated)
$10.00- 1 foot length
- 6 Pin JST connector to bare wires
- Configured for use with the RHP-BOS-VPC-IF, RHP-BOS-VPC3-IF, RHP-BOS-TTL-IF
-
7Pin JST Cable to USB 3
- 3′ Length
- Female 7 Pin JST to USB 3
- Used with the RHP-BOS-VPC3-IF – Low Profile BOSON VPC3 Interface Module with USB3
-
7Pin JST connector to flying leads
$10.00- 7 Pin JST connector to bare wires
- Configured for use with the RHP-BOS-TTL-IF and RHP-BOS-CL-SY-IF
- 1 foot length
-
Antenna for WLAN 2.4/5 GHz
$66.99This Antenna for WLAN 2.4/5 GHz is an accessory for the following products:
- FLIR A400/A700 Thermal Smart Sensor configuration
- FLIR A400/A700 Thermal Image Streaming configuration
- FLIR GF77a
-
Ax5 Accessory Starter Kit
$289.99- T911183, Gigabit PoE injector 16 W, with multi-plugs,
- T127605ACC, Cable M12 Pigtail,
- T951004ACC, Ethernet cable CAT6, 2 m/6.6 ft.
-
-
-
-
-
Environmental Enclosure for the Teledyne FLIR Boson
- Material: Anodized Aluminum
- Size (L x W x H): 82mm x 47mm x 52mm**
- 2 x 1/4″-20 Mount Points
- Encapsulation: IP67 Rated
- Weight: < 11 oz. (< 300g)
Compatible With:
Boson/Boson+ 320* Boson/Boson+ 640* 2.3mm | 92° HFoV
4.3mm | 50° HFoV
4.5mm | 50° HFoV SL Rad.
6.3mm | 34° HFoV
6.3mm | 34° HFoV Rad.
9.1mm | 24° HFoV
13.8mm | 16° HFoV
18mm | 12° HFoV4.9mm | 95° HFoV
4.9mm | 95° HFoV SL
8.7mm | 50° HFoV
9.2mm | 50° HFoV SL Rad.
13.6mm | 32° HFoV SL
13.6mm | 32° HFoV SL Rad.
13.6mm | 32° HFoV NS
14mm | 32° HFoV
18mm | 24° HFoV
18mm|24° HFoV SL
18mm|24° HFoV Rad.
24mm | 18° HFoV
24mm | 18° HFoV Rad.SL=Short Lens | Rad.=Radiometric | NS=No Shutter *Teledyne FLIR Boson Thermal Imaging Cameras sold separately. **Measurement does not include connector. Future 95° version width may increase to 48mm. This product has multiple variants. The options may be chosen on the product page -
-
-
FH Series Wall Mount Kit
$409.00Simplify camera setup with the Teledyne FLIR FH Series Wall Mount Kit, offering a reliable and efficient solution for mounting the FH Series Thermal Cameras. This wall mount kit is thoughtfully engineered to provide a secure and flexible installation option, allowing you to position your cameras at the desired height and angle. Its robust construction…