Teledyne FLIR F-/FC Series Corner Mount
$164.00-
- Corner Mount
For use with:
- TRITONF-SERIES ID
- ELARAFC-SERIES O
- ELARAFC-Series R
- ELARAFC-SERIES ID
Showing 41–58 of 58 results
-
-
-
-
-
Teledyne FLIR FC Series Pole Adapter
$159.00FLIR FC Series Pole Adapter
4132982
The FC-Series Wall Mount can be fixed to a Pole with this Pole Mount Accessory.
If the camera is mounted on a pole, an Ethernet cable should run at least to the bottom of the pole, so a laptop could be temporarily connected directly to the camera.
-
Teledyne FLIR Large Pole Adapter
$309.00PT-Series & F-Series Wall Mount
High capacity pole mount for pole diameters between 150mm-230mm
Part Number 500-1116-00Kit Contents:
- PT-Series pole mount adapter 4119498
- Support strut pole mount adapter 4123212
- 4 each 5/16 nut
- 4 each 5/16 flat washer
- 4 each 5/16 split lock washer
- 3 each 1/4 nut
- 3 each 1/4 flat washer
- 3 each 1/4 split lock washer
-
Teledyne FLIR PT-Series Corner Mount
$269.00Teledyne FLIR PT-Series Corner Mount High capacity corner mount
Part Number: 500-1118-00
-
Teledyne FLIR PT-Series Pedestal Mount Assembly
$569.00Kit Contents:
- PT-Series pedestal mount 4119497 PT-Series adapter plate 4119468
- 6 each 1/4-20 FHMS x 3/4″Hex, S.S. 6 each 5/16-18 x 3/4 SHCS, S.S.
- 6 each 5/16 split washer
- 6 each 5/16 flat washer
- Two extra pieces of each attaching part
-
Teledyne FLIR PT-Series Small Pole Adapter
$389.00- High capacity pole mount for pole diameters between 80mm-150mm
-
Teledyne FLIR PT-Series Wall Mount
$729.00High capacity wall mount
The Teledyne FLIR PT-Series wall mount assembly is designed for use with medium- and heavy-duty pan and tilt units. -
Teledyne FLIR PTU-5 Side Mount Payload Bracket
$48.00Side Mount Payload Bracket (1)
Side-mounting payload bracket for the PTU-5 pan tilt. Up to 3 lb capacity per side, 6 lb total with two side brackets. Side bracket use requires removal of the PTU-5 top bracket. (Side and top brackets cannot be used together at the same time.) -
Teledyne FLIR Tau Photon Replicator Board
$165.00This expansion board adapts the Tau camera’s native 50-pin Hirose connector to the 30-pin SAMTEC connector used on FLIR’s Photon cameras. The replicator board makes the Tau camera electrically pin-compatible to a Photon camera. Without a Photon Replicator Board, the input voltage range is 4.0-6.0 VDC for a Tau 320 camera, and 4.4-6.0 VDC for a Tau 640. With the Photon Replicator Board, the input voltage range is modified to 6.5-27.0 VDC.
* Includes spacer and screws
This expansion board adapts the Tau camera’s native 50-pin Hirose connector to the 30-pin SAMTEC connector used on FLIR’s Photon cameras. The replicator board makes the Tau camera electrically pin-compatible to a Photon camera.
Without a Photon Replicator Board, the input voltage range is 4.0-6.0 VDC for a Tau 320 camera, and 4.4-6.0 VDC for a Tau 640. With the Photon Replicator Board, the input voltage range is modified to 6.5-27.0 VDC.
A cast magnesium spacer and 4 socket-head machine screws are included (not shown).
Stock is very limited. There are only: 2 Units Left
-
USB 2.0 Cable – USB2-A-B-6 – 6Ft Type A to Mini B
$11.95USB2.0 Cable – USB2-A-B-6 – 6Ft Type A to Mini B
-
USB 3.1 Cable Type C
$34.00- USB 3.0 cable
- End 1: USB 3.0 (Type-A)
- End 2: USB 3.0 (Micro-B) Locking screws
- 3 m in length
-
RHP-BOS-DSU2-IF Dual Sensor USB 2 Board for Boson and E/O
- Dual USB Video over single interface
- Optically Centered
- 2x additional USB ports for other sensors or cameras
- Small form factor
- Wide input range 5-17 VDC
- Ideal for Drone, UAV, UGV Implementation
- No drivers Required
- Compatible with Windows, Mac and Linux Operating systems
-
RHP Boson Video Controller
Works with these RHP Boson Interface Assemblies:
- Low Profile BOSON VPC
- Low Profile BOSON VPC3
- RHP-BOS-USBC-IF
- RHP Boson Camera Link Interface Board
- RHP Boson LVDS Encoder Board
- RHP BOSON VPC TTL Interface Module
- RHP IP LVDS Encoder Board
Instantly Download Below
-
RHP Boson Camera Controller Application
Works with these RHP Boson Interface Assemblies
- RHP BOSON RC-IF REMOTE CONTROL INTERFACE
- RHP BOSON RC-HD-IF REMOTE CONTROL INTERFACE
- RHP-BOS-DS-IF DUAL THERMAL SENSOR INTERFACE
Instantly Download Below
-
Teledyne FLIR Boson Camera Link Accessory
$600.00- Camera Link and USB interface to Boson video
- converts Bosons CMOS video
- Standard SDR-26 receptacle
- USB-3 micro-B connection